If it is not in the list, inquire.

BLIND TESTS:
1. Blind common anabolic steroid screening - oils:
1. Margin of error: 5%
2. Compounds quantified:
3. Detection limit cutoff: 15 mg/ml, drostanolone propionate and enanthate: 25 mg/ml.
4. Result format: mg/ml ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Minimum quantity for analysis: 0.4 ml
7. Optimum quantity for analysis: 1 ml
8. Shipping conditions:
a) Oils must not leak. Packages with leaked oil are discarded to ensure safety of our employees. Make sure the oil does not leak.
b) Make sure the oil is not crashed before you transfer the oil to the sample vial.
c) Only approved shipping containers must be used:
Containers on Amazon (great for NORTH AMERICA, UK, WESTERN EUROPE): Option 1, Option 2, Option 3, Option 4
AUSTRALIA: Option 1, Option 2
REST OF THE WORLD: Inquire with us.
Original sealed ampules, original sealed vials or other containers can be used only after consulting with us beforehand.
d) Put the vial with oil into a ziplock bag and label it as per instructions.

CLICK FOR EXAMPLE OF PROPER PACKAGING OF THE OIL

2. Blind common anabolic steroid and aromatase inhibitors screening - orals (pills, tablets, capsules):
1. Margin of error: 5%
2. Compounds quantified:
3. Detection limit cutoff: 2 mg. Letrozole, Anastrozole: 0.2 mg.
4. Result format: mg ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Minimum quantity for analysis: 1 pill/tablet/capsule
7. Optimum quantity for analysis: 3 pills/tablets/capsules (one is tested, two serve as backup)
8. Shipping conditions:
a) Pills, tablets or capsules must not get crushed during shipping. Use cotton padding as necessary.
b) Simply put 3 pills/tablets/capsules into a small (!) ziplock bag with a label. Original or alternative containers can be used only after consulting with us beforehand.

CLICK FOR EXAMPLE OF PROPER PACKAGING OF PILL, TABLET OR CAPSULE SAMPLE

3. Blind common anabolic steroid and aromatase inhibitors screening - raws (purity testing):
1. Margin of error: 5%
2. Compounds quantified:
3. Detection limit cutoff: 50%.
4. Result format: % [98%+, 96%+ or % value such as 94.15%] ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Shipping conditions:
a) Put at least 200 mg of the raw powder (maximum 2000 mg) into a small (!) ziplock bag. Alternatively, reliable, properly sealed glass vials (eg. autosampler vials) can be used.
b) Add label and put into a slightly bigger ziplock bag or tape the label written on a piece of paper to the ziplock bag. Make sure the tape will not cause the ziplock bag to get torn when opening.
c) For boldenone undecylenate follow the instructions for shipping AAS oils and use a vial.

CLICK FOR EXAMPLE OF PROPER PACKAGING OF A RAW POWDER

4. Blind common anabolic steroid screening - liquid suspension:
1. Maximum margin of error: 10%
2. Compounds quantified:
3. Detection limit cutoff: 15 mg/ml,
4. Result format: mg/ml ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Shipping conditions:
a) Best shipped in untouched original container. Alternatively, reliable, properly sealed glass vials (eg. autosampler vials Example 1, Example 2) can be used.
b) If alternative container, such as autosampler vial is used, shake the suspension well and transfer such amount that the sample vial is filled to at least 70% but no more than 90%. Do it very fast.
c) Proceed with packaging and labelling as you would with a blind common AAS oil sample.

5. Blind common SARMs and related compounds screening
1. Margin of error: 5%
2. Compounds quantified:
3. Detection limit cutoff: 2 mg for pills, tablets or capsules or 10% in raw powder.
4. Result format: mg or %.
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. NOTE: For sample forms other than raw powder or pills, tablets or capsules consult beforehand.
7. Proceed with packaging and labelling as you would with anabolic steroid pill/tablet/capsule or raw powder sample.

HGH:
1. Human Growth Hormone amount and purity analysis: 300 USD / sample
1. Margin of error: 5% both purity and amount.
2. Compounds quantified: human growth hormone.
3. Detection limit cutoff: 0.2 mg/ml or 0.5 mg/vial,
4. Result format: mg, IU + % ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Minimum quantity for analysis: 1 vial/pen/cartridge
7. Optimum quantity for analysis: 2 vials/pens/cartridges
8. Shipping conditions:
a) Put 1 or 2 vials into a ziplock bag with a label or label the pen/cartridge well with the label (write the label on a piece of paper and tape it to the pen/cartridge). Add cotton padding as necessary.

CLICK FOR EXAMPLE OF PROPER PACKAGING OF HGH

2. Human Growth Hormone amount, purity and dimer and higher molecular weight proteins analysis: 420 USD / sample
1. Margin of error: 5% purity and amount, 10% dimer and higher molecular weight proteins amount.
2. Compounds quantified: human growth hormone, dimer and higher molecular weight proteins amount.
3. Detection limit cutoff: 0.2 mg HGH/ml or 0.5 mg HGH/vial, 0.008% dimer and higher molecular weight proteins amount
4. Result format: mg, IU + % ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Minimum quantity for analysis: 1 vial/pen/cartridge
7. Optimum quantity for analysis: 2 vials/pens/cartridges
8. Shipping conditions:
a) Put 1 or 2 vials into a ziplock bag with a label or label the pen(s)/cartridge(s) well with the label (write the label on a piece of paper and tape it to the pen/cartridge). Add cotton padding as necessary.

CLICK FOR EXAMPLE OF PROPER PACKAGING OF HGH

HGH purity is calculated via the normalisation procedure at 220 nm. Amount is calculated via external standard method using EU Pharmacopoeia Reference Standard.

CUTTING AGENTS:
1. DNP and Sibutramine analysis:
1. Margin of error: 5%
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: sibutramine: 4 mg for pills, tablets or capsules or 5% in raw powder, DNP 20 mg for pills, tablets or capsules or 5% in raw powder,
4. Result format: mg or % ( click for report format example )
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. NOTE: For sample forms other than raw powder or pills, tablets or capsules consult beforehand.
7. Proceed with packaging and labelling as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
8. Write the name of the compound to be analyzed on the label as well.

3. T3, T4 and Clenbuterol analysis:
1. Margin of error: 10%
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 15 mcg for pills, tablets or capsules or 5% in raw powder.
4. Result format: mcg or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. NOTE: For sample forms other than raw powder or pills, tablets or capsules consult beforehand.
7. Proceed with packaging and labelling as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
8. Write the name of the compound to be analyzed on the label as well.

MK-677 and GW-5051516:
1. MK-677 analysis and GW-501516 analysis:
1. Margin of error: 5%
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 2 mg for pills, tablets or capsules or 10% in raw powder.
4. Result format: mg or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. NOTE: For sample forms other than raw powder or pills, tablets or capsules consult beforehand.
7. Proceed with packaging and labelling as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
8. Write the name of the compound to be analyzed on the label as well.

SERMS:
1. Clomiphene, Tamoxifen or Raloxifene analysis and Enclomiphene analysis:
1. Margin of error: 5%
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 5 mg for pills, tablets or capsules or 10% in raw powder.
4. Result format: mg or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. NOTE: For sample forms other than raw powder or pills, tablets or capsules consult beforehand.
7. Proceed with packaging and labelling as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
8. Write the name of the compound to be analyzed on the label as well.

SEXUAL HEALTH:
1. Tadalafil, Sildenafil and Vardenafil analysis:
1. Margin of error: 5%
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 2 mg for pills, tablets or capsules or 10% in raw powder.
4. Result format: mg or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. NOTE: For sample forms other than raw powder or pills, tablets or capsules consult beforehand.
7. Proceed with packaging and labelling as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
8. Write the name of the compound to be analyzed on the label as well.

LESS COMMON ANABOLIC STEROIDS:
1. Methyltrenbolone and Mibolerone analysis:
1. Margin of error: 10%
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 0.5mg/ml for oils, 0.5 mg for pills, tablets or capsules or 10% in raw powder.
4. Result format: mg/ml, mg or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Proceed with packaging and labelling as you would with an anabolic steroid oil, pill/tablet/capsule or raw powder sample.
7. Write the name of the compound to be analyzed on the label as well.

2. DHT, Boldenone cypionate, Boldenone acetate and Nandrolone cypionate analysis:
1. Margin of error: 5% (DHT: 10%)
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 20mg/ml for oils or 10% in raw powder.
4. Result format: mg/ml or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Proceed with packaging and labelling as you would with an anabolic oil or raw powder sample.
7. Write the name of the compound to be analyzed on the label as well.

3. Methyltestosterone, Epistane and Methyl-1-testosterone analysis
1. Margin of error: 5% (Epistane: 10%)
2. Compounds quantified: only the compound of interest.
3. Detection limit cutoff: 4 mg for pills, tablets or capsules or 10% in raw powder
4. Result format: mg or %
5. Average turnaround time: 96 hours. Guaranteed turnaround time: 21 days.
6. Proceed with packaging and labelling as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
7. Write the name of the compound to be analyzed on the label as well.

PEPTIDES:
NOTE: Peptide purity is not determined with HCG.

Peptides are by default dissolved in ultrapure water. 2 ml of ultrapure water are used by default for 2ml peptide vials.
If you want your sample to be dissolved in a different solvent, we need to be informed!

For lyophilised peptides in sealed vials, the quantity of the peptide of interest is determined with the testing and the peptide purity is calculated via the normalisation procedure at 220 or 280 nm.
For raw peptide powders, the quantity of the peptide of interest per unit of mass of the powder is determined with the testing and the peptide purity is calculated as per the above.

For shipping conditions please see instructions for HGH. For shipping peptide raw powder always inquire.

Margin of error with peptides that are routinely tested (the ones quoted in the pricing) is 10%, detection limit is usually less than 1/20th of the usual dosage per vial.

Exceptions to margin of error: Tirzepatide (5 %), Semaglutide (5%), HCG (20%).

HAIR RELATED:
1. Finasteride, CB-03-01, Setipiprant and Dutasteride analysis:

Package and label as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
Write the name of the compound to be analyzed on the label as well.

For details, please, inquire.

OTHERS:
1. Isotretinoin, Cabergoline, TUDCA and Modafinil analysis:

Package and label as you would with an anabolic steroid pill/tablet/capsule or raw powder sample.
Write the name of the compound to be analyzed on the label as well.

For details, please, inquire.

For samples not listed with average turnaround or guaranteed turnaround time, please, always inquire.

Additional services:
1. Rush fee - sample is put in front of the testing queue: self explanatory
2. Pictures of the sample: self explanatory
3. Raw data: self explanatory. This does not include providing information about sample handling or HPLC, GC / MS or NMR method setting parameters which are our intellectual property.
4. Additional information about the testing: as per agreement, if it is reached.
5. Multiple pieces tested for orals (eg. 2, 3 or 5 pills of the same sample tested): self explanatory
6. Heavy metals (As, Cd, Pb, Hg) analysis: trace heavy metal analysis. Other metals possible too, inquire. Average turnaround time: 20 days.
7. GCMS screening: We have GC/MS with a library at our disposal, the cost mentioned is for very basic GCMS screening, not any advanced work or method development.
8. NMR / LCMS services: We have high field NMR and HR-LCMS at our disposal.

For details, please, inquire.